Joying Technology Co., Ltd
Volvo V70 D5 2005 - Printable Version

+- Joying Technology Co., Ltd (https://www.forum-joyingauto.com)
+-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1)
+--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3)
+--- Thread: Volvo V70 D5 2005 (/showthread.php?tid=2900)

Volvo V70 D5 2005 - TandtHans - 02-12-2019

Hello,
I'm searching for the perfect match for replacing my HU-850 radio.
Have sent some email to Joying. But till now, no reply. So, I try this forum. Maybe I will have more luck.
I will explain my problem or the problems that I have.

1. When I select my type of car, the Joying is proposing a single DIN radio. OK, why not double DIN?

This is my radio:
[Image: image.png.deb93428e0b97b8ab97284414a5aad6a.png]

I also need an interface cable set and frame.
But this is mostly double DIN version. Like this:
[Image: s-l1600.jpg]

I took the risk and I ordered this system:
[Image: 4g_double_din_car_radio.jpg]

I also ordered a cable Harness with CanBus module. So, that's what I hope, the steering wheel functions will work again.
Don't know what will happen with the other information coming over the CanBus system. Such parking sensors and so on.
[Image: 3368.jpg]

I also ordered a USB plug from Rittal.
[Image: schirmungsstreifen-6.jpg]
This I will install on the left of the screen. It will be connected to one of the two USB plugs.
It's a pity that there are no more USB plugs and/or one in the front.

Once I will have everything I will let you know how it works.

Regards,
Hans

RE: Volvo V70 D5 2005 - admin - 02-19-2019

(02-12-2019, 11:56 AM)TandtHans Wrote:  Hello,
I'm searching for the perfect match for replacing my HU-850 radio.
Have sent some email to Joying. But till now, no reply. So, I try this forum. Maybe I will have more luck.
I will explain my problem or the problems that I have.

1. When I select my type of car, the Joying is proposing a single DIN radio. OK, why not double DIN?

This is my radio:
[Image: image.png.deb93428e0b97b8ab97284414a5aad6a.png]

I also need an interface cable set and frame.
But this is mostly double DIN version. Like this:
[Image: s-l1600.jpg]

I took the risk and I ordered this system:
[Image: 4g_double_din_car_radio.jpg]

I also ordered a cable Harness with CanBus module. So, that's what I hope, the steering wheel functions will work again.
Don't know what will happen with the other information coming over the CanBus system. Such parking sensors and so on.
[Image: 3368.jpg]

I also ordered a USB plug from Rittal.
[Image: schirmungsstreifen-6.jpg]
This I will install on the left of the screen. It will be connected to one of the two USB plugs.
It's a pity that there are no more USB plugs and/or one in the front.

Once I will have everything I will let you know how it works.

Regards,
Hans

sorry for delay reply due to our holiday .

have you purchased your head unit ? if you buy the proper dash kit and the kit size is 178*100 mm , then you can install our UO135N4G head unit .
if you still have problems , please contact us to support@joyingauto.com