+- Joying Technology Co., Ltd (https://www.forum-joyingauto.com)
+-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1)
+--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3)
+--- Thread: Button color changes by itself - Head-unit JY-UOS03N4GS (/showthread.php?tid=3670)
Pages:
1
2
Button color changes by itself - Head-unit JY-UOS03N4GS - wohew - 09-02-2019
Head-unit JY-UOS03N4GS, Firmware from August 2019
Illumination Cable and + and Ignition are connected correctly.
I can change the button light color in the setting to green. So when I switch on the car light they are green, when I switch off the light the buttons are off, as it is normal.
But after I turn off the car and turn on it again, the button light color go back to blue with Car Lights off and violett with Lights on. When I turn off the car, the Buttons keep shining blue for some minutes.
The settings page keeps on showing the right color for the keys *green* that I had chosen. That means the color is saved, but the keys show other colors....
After a reset, the colors are correct again until turning off the car and turning it on again.
All other settings keep saved when turning off the car.
Does anybody have the same problem and found a solution?
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - admin - 09-03-2019
(09-02-2019, 06:50 AM)wohew Wrote: Head-unit JY-UOS03N4GS, Firmware from August 2019
Illumination Cable and + and Ignition are connected correctly.
I can change the button light color in the setting to green. So when I switch on the car light they are green, when I switch off the light the buttons are off, as it is normal.
But after I turn off the car and turn on it again, the button light color go back to blue with Car Lights off and violett with Lights on. When I turn off the car, the Buttons keep shining blue for some minutes.
The settings page keeps on showing the right color for the keys *green* that I had chosen. That means the color is saved, but the keys show other colors....
After a reset, the colors are correct again until turning off the car and turning it on again.
All other settings keep saved when turning off the car.
Does anybody have the same problem and found a solution?
You need to connect the ILLUM (orange+white ) wire with your car headlight wire.
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - wohew - 09-03-2019
„You need to connect the ILLUM (orange+white ) wire with your car headlight wire.“
It is connected. Otherwise the Coulor would not Change when turning the lights on and off. Also the Brightness changes while turning on the lights...!
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - admin - 09-04-2019
(09-03-2019, 10:22 AM)wohew Wrote: „You need to connect the ILLUM (orange+white ) wire with your car headlight wire.“
It is connected. Otherwise the Coulor would not Change when turning the lights on and off. Also the Brightness changes while turning on the lights...!
Please show the video to our email support@joyingauto.com
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - julien_blanche - 09-04-2019
(09-04-2019, 07:06 AM)admin Wrote:(09-03-2019, 10:22 AM)wohew Wrote: „You need to connect the ILLUM (orange+white ) wire with your car headlight wire.“
It is connected. Otherwise the Coulor would not Change when turning the lights on and off. Also the Brightness changes while turning on the lights...!
Please show the video to our email support@joyingauto.com
same problem after update with august firmware:
when you turn on the headlights everything works as expected but when you turn off the headlights side panel illumination color change itself to a different one and can not be change with turned off headlights. Also when you power off the unit side panel lights remain illuminated for 5 mins.
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - admin - 09-05-2019
(09-03-2019, 10:22 AM)wohew Wrote: „You need to connect the ILLUM (orange+white ) wire with your car headlight wire.“
It is connected. Otherwise the Coulor would not Change when turning the lights on and off. Also the Brightness changes while turning on the lights...!
Please contact us with email. support@joyingauto.com
Here we can not send the pictures to you on how to do.
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - admin - 09-05-2019
(09-04-2019, 11:44 PM)julien_blanche Wrote:(09-04-2019, 07:06 AM)admin Wrote:(09-03-2019, 10:22 AM)wohew Wrote: „You need to connect the ILLUM (orange+white ) wire with your car headlight wire.“
It is connected. Otherwise the Coulor would not Change when turning the lights on and off. Also the Brightness changes while turning on the lights...!
Please show the video to our email support@joyingauto.com
same problem after update with august firmware:
when you turn on the headlights everything works as expected but when you turn off the headlights side panel illumination color change itself to a different one and can not be change with turned off headlights. Also when you power off the unit side panel lights remain illuminated for 5 mins.
Are you sure that you have connected right ILLUM (orange+white) with your car headlight wire?
If yes, may I know the problems occurred after update to the August firmware or you still insist?
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - admin - 09-05-2019
(09-04-2019, 11:44 PM)julien_blanche Wrote:(09-04-2019, 07:06 AM)admin Wrote:(09-03-2019, 10:22 AM)wohew Wrote: „You need to connect the ILLUM (orange+white ) wire with your car headlight wire.“
It is connected. Otherwise the Coulor would not Change when turning the lights on and off. Also the Brightness changes while turning on the lights...!
Please show the video to our email support@joyingauto.com
same problem after update with august firmware:
when you turn on the headlights everything works as expected but when you turn off the headlights side panel illumination color change itself to a different one and can not be change with turned off headlights. Also when you power off the unit side panel lights remain illuminated for 5 mins.
By the way, have you chosen the "small light control" on the setting?
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - wohew - 09-05-2019
(09-05-2019, 02:34 AM)admin Wrote:(09-04-2019, 11:44 PM)julien_blanche Wrote:(09-04-2019, 07:06 AM)admin Wrote:(09-03-2019, 10:22 AM)wohew Wrote: „You need to connect the ILLUM (orange+white ) wire with your car headlight wire.“
It is connected. Otherwise the Coulor would not Change when turning the lights on and off. Also the Brightness changes while turning on the lights...!
Please show the video to our email support@joyingauto.com
same problem after update with august firmware:
when you turn on the headlights everything works as expected but when you turn off the headlights side panel illumination color change itself to a different one and can not be change with turned off headlights. Also when you power off the unit side panel lights remain illuminated for 5 mins.
By the way, have you chosen the "small light control" on the setting?
Yes. ! And yes!
RE: Button color changes by itself - Head-unit JY-UOS03N4GS - julien_blanche - 09-05-2019
(09-05-2019, 02:32 AM)admin Wrote:(09-04-2019, 11:44 PM)julien_blanche Wrote:(09-04-2019, 07:06 AM)admin Wrote:(09-03-2019, 10:22 AM)wohew Wrote: „You need to connect the ILLUM (orange+white ) wire with your car headlight wire.“
It is connected. Otherwise the Coulor would not Change when turning the lights on and off. Also the Brightness changes while turning on the lights...!
Please show the video to our email support@joyingauto.com
same problem after update with august firmware:
when you turn on the headlights everything works as expected but when you turn off the headlights side panel illumination color change itself to a different one and can not be change with turned off headlights. Also when you power off the unit side panel lights remain illuminated for 5 mins.
Are you sure that you have connected right ILLUM (orange+white) with your car headlight wire?
If yes, may I know the problems occurred after update to the August firmware or you still insist?
Problem occurred after august update, it was not exist before.