Opel Canbus decoder on universal FYT radio - Printable Version +- Joying Technology Co., Ltd (https://www.forum-joyingauto.com) +-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1) +--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3) +--- Thread: Opel Canbus decoder on universal FYT radio (/showthread.php?tid=2877) |
Opel Canbus decoder on universal FYT radio - alpakay - 12-27-2018 I have purchased the universal radio JY-UOS02P4, but I want to use it in my Opel Vectra C. Normally, you would use a Canbus box and a radio specific for the Opel Vectra, such as the JY-OM001N2 Now I want to use the Opel harness with Canbus box on the JY-UOS02P4, but I was told by sales department this would not work. Why? My question is, what is different in the hardware between these two radios? Maybe I can solder something? Maybe I need to connect the canbus box TX and RX to the PX5 serial TX and RX? For my radio, I can choose a CAN protocol, which I have set to XP -> Other -> Opel -> XP. How would this normally work? There is no serial RX and TX on the radio connector. RE: Opel Canbus decoder on universal FYT radio - mumu409 - 02-08-2019 I also want to do this in my 2015 Kia Optima EX. I have JY-UOS07N4. I too have set the CAN protocol in my settings, but I'm a little weary about doing the canbus upgrade that would take about 10 mins. I'm not sure if that is the correct procedure. RE: Opel Canbus decoder on universal FYT radio - admin - 02-19-2019 (12-27-2018, 03:23 PM)alpakay Wrote: I have purchased the universal radio JY-UOS02P4, but I want to use it in my Opel Vectra C. Normally, you would use a Canbus box and a radio specific for the Opel Vectra, such as the JY-OM001N2 Sorry that the Opel harness not workable on the universal head unit (UOS02P4 ) . the resistor on the motherboard between two head unit is different . though you use the harness on your car , it also cannot keep the steering wheel control . |