+- Joying Technology Co., Ltd (https://www.forum-joyingauto.com)
+-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1)
+--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3)
+--- Thread: Problem with assembly and color of backlight (/showthread.php?tid=3518)
Problem with assembly and color of backlight - marcinr0 - 04-14-2019
Hello,
1) The assembly is impossible because the holes do not fit,
I added a photo and compared the original Toyota radio
2) As I choose the orange backlight of the keys (the original car) it is light green and
when I choose white it shines a bright blue color.
How to change it?
[attachment=197][attachment=198]
In the picture above the location of mounting holes in the original Toyota radio (Panasonic).
In the bottom picture, the location of the HU Joying mounting holes.
On the right, the original Toyota assembly component.
RE: Problem with assembly and color of backlight - admin - 04-15-2019
(04-14-2019, 12:35 AM)marcinr0 Wrote: Hello,
1) The assembly is impossible because the holes do not fit,
I added a photo and compared the original Toyota radio
2) As I choose the orange backlight of the keys (the original car) it is light green and
when I choose white it shines a bright blue color.
How to change it?
Unfortunately, adding photos does not work...
May I know what is your car model and its year?
Could you please send us your car center dashboard picture for us checking?
If is convenient, please send your order number and your problems to our email support@joyingauto.com
We will help.
RE: Problem with assembly and color of backlight - marcinr0 - 04-15-2019
[/quote]
May I know what is your car model and its year?
Could you please send us your car center dashboard picture for us checking?
If is convenient, please send your order number and your problems to our email support@joyingauto.com
We will help.
[/quote]
[attachment=199]
Here in the picture is Orange - for comparison (Under the radio)
RE: Problem with assembly and color of backlight - admin - 04-27-2019
May I know what is your car model and its year?
Could you please send us your car center dashboard picture for us checking?
If is convenient, please send your order number and your problems to our email support@joyingauto.com
We will help.
[/quote]
Here in the picture is Orange - for comparison (Under the radio)
[/quote]
Do you mean that you want to choose the orange as the button key light?
You need to connect the ILLUM (orange+white) with your car headlight wire.
And then you need to go to the setting. Set "small light control" and choose the orange color as button light.
RE: Problem with assembly and color of backlight - marcinr0 - 04-29-2019
Do you mean that you want to choose the orange as the button key light?
You need to connect the ILLUM (orange+white) with your car headlight wire.
And then you need to go to the setting. Set "small light control" and choose the orange color as button light.
[/quote]
You do not understand me.
In 1 picture is shown which color was chosen (orange)
and in the same picture you can see what color of the buttons is lit (bright green)
I do not understand why I should connect the wires when the illumination color does not match.
Cables are connected ...[attachment=213]