+- Joying Technology Co., Ltd (https://www.forum-joyingauto.com)
+-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1)
+--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3)
+--- Thread: volume too loud (/showthread.php?tid=3945)
volume too loud - pieusu - 06-04-2020
hi my volume only at 4 or 5 level on scale is already very loud, I have to turn it down to 2 to or 3 bar level to not hurt my ears.
Why is it doing this and how to fix?
Model Name: JY-UOS05N4GS
RE: volume too loud - admin - 06-05-2020
(06-04-2020, 01:56 AM)pieusu Wrote: hi my volume only at 4 or 5 level on scale is already very loud, I have to turn it down to 2 to or 3 bar level to not hurt my ears.
Why is it doing this and how to fix?
Model Name: JY-UOS05N4GS
you can try to set here "setting-General-default boot volume" or here"setting-factory-volume balance settings".
RE: volume too loud - Count_Zilch - 08-03-2020
(06-05-2020, 07:32 AM)admin Wrote:(06-04-2020, 01:56 AM)pieusu Wrote: hi my volume only at 4 or 5 level on scale is already very loud, I have to turn it down to 2 to or 3 bar level to not hurt my ears.
Why is it doing this and how to fix?
Model Name: JY-UOS05N4GS
you can try to set here "setting-General-default boot volume" or here"setting-factory-volume balance settings".
This doesn't work. The boot volume is fine, but the signal going to the built in amp is the issue. Setting all the balances to zero is still too loud and it produces a loud hiss across all speakers.
RE: volume too loud - admin - 08-08-2020
(08-03-2020, 04:13 AM)Count_Zilch Wrote:(06-05-2020, 07:32 AM)admin Wrote:(06-04-2020, 01:56 AM)pieusu Wrote: hi my volume only at 4 or 5 level on scale is already very loud, I have to turn it down to 2 to or 3 bar level to not hurt my ears.
Why is it doing this and how to fix?
Model Name: JY-UOS05N4GS
you can try to set here "setting-General-default boot volume" or here"setting-factory-volume balance settings".
This doesn't work. The boot volume is fine, but the signal going to the built in amp is the issue. Setting all the balances to zero is still too loud and it produces a loud hiss across all speakers.
May I know what is your canbus setting? please the picture for us checking.