Noisy radio stations, bad reception! Please fix this Joying!! - Printable Version +- Joying Technology Co., Ltd (https://www.forum-joyingauto.com) +-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1) +--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3) +--- Thread: Noisy radio stations, bad reception! Please fix this Joying!! (/showthread.php?tid=4215) |
Noisy radio stations, bad reception! Please fix this Joying!! - DJFryslan - 01-30-2021 All the radio stations are noisy with the original radio app... I tried to fix it with a new roof antenna and later also with a signal amplifier , but it is still noisy on all radio stations. A 'solution' is to install an internet radio app Car Radio. Important: this app does use mobile data. Is there a way to update the original radio app? Does Joying has a fix for this big problem? RE: Noisy radio stations, bad reception! Please fix this Joying!! - admin - 02-03-2021 (01-30-2021, 08:31 AM)DJFryslan Wrote: All the radio stations are noisy with the original radio app... please send the screenshot of "about device" on the head unit RE: Noisy radio stations, bad reception! Please fix this Joying!! - toecheese - 02-07-2021 I have the same problem and have found a fix. I checked the unit's blue antenna power output wire with with a meter and it is only outputting 10.6V instead of 12V like it is supposed to. So instead of using that wire, I connected my car's signal booster to to the same 12V supply that feeds the headunit itself and PRESTO! I get normal radio reception again. The booster is not working properly with 10.6V, it really needs the full 12V. I have asked another Joying owner to check and he is getting 12V from his antenna output. Since there are several of us here with the same reception problem, I suspect the 10.6V output is a defect with some units. Anyway connect your car's signal booster to full 12V power and it should fix the problem. Joying, you may have a design fault here. |