+- Joying Technology Co., Ltd (https://www.forum-joyingauto.com)
+-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1)
+--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3)
+--- Thread: SWC and Ilumination Buttons not working (/showthread.php?tid=4293)
SWC and Ilumination Buttons not working - Jorge - 04-03-2021
Hello to all!
I recently got my unit and install it and after i get 3 problems, would like to get some help on solving them:
First issue (Solved) - unable to enter my google account, kick out from login page. For this i read this Thread and after update the firmware, i was able to put my google credentials and setup everything around them.
Second issue, unsolved - Left Illumination Buttons not working. I double checked wiring setup and it's ok, so i'll try to say happening in my unit. After i turn car key to Ignition position, unit turns On fast and normally and at same time, left illumination buttons flash white for half a second and turn off. I tried to find any unit configuration to turn on/off and color select, but could not find any. Please advise on this.
Third issue, unsolved - SWC not working. I double checked wiring setup and it's ok. For this problem i already read this Thread but unit don't read anything from the SWC. I confirm i don't have Can-bus decoder and both "KEY" and "CAN OUT" are connected. Please advise on this too
Cheers!
RE: SWC and Ilumination Buttons not working - admin - 04-06-2021
(04-03-2021, 01:23 PM)Jorge Wrote: Hello to all!YOu need to buy the harness adapter for keeping your steering wheel control.
I recently got my unit and install it and after i get 3 problems, would like to get some help on solving them:
First issue (Solved) - unable to enter my google account, kick out from login page. For this i read this Thread and after update the firmware, i was able to put my google credentials and setup everything around them.
Second issue, unsolved - Left Illumination Buttons not working. I double checked wiring setup and it's ok, so i'll try to say happening in my unit. After i turn car key to Ignition position, unit turns On fast and normally and at same time, left illumination buttons flash white for half a second and turn off. I tried to find any unit configuration to turn on/off and color select, but could not find any. Please advise on this.
Third issue, unsolved - SWC not working. I double checked wiring setup and it's ok. For this problem i already read this Thread but unit don't read anything from the SWC. I confirm i don't have Can-bus decoder and both "KEY" and "CAN OUT" are connected. Please advise on this too
Cheers!