no Steering Wheel Control Ground - Printable Version +- Joying Technology Co., Ltd (https://www.forum-joyingauto.com) +-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1) +--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3) +--- Thread: no Steering Wheel Control Ground (/showthread.php?tid=5248) |
no Steering Wheel Control Ground - troun - 07-26-2022 Hi, I just installed my brand new 11.6 UIS7862 (UQS11N8G-H), but I have so far two problems. Second on is the following: Previous Android HeadUnit had 3 Steering Wheel Control (SWC) wires. Aka: SWC1, SWC2 and SWC GND. I connected the car Steering Wheel Controls (resistivity, not CAN) through SWC1 and SWC GND, and it was working properly. My current Joying HeadUnit does not have a SWC GND. I tried, without success to: _ Connect Key1 alone (assuming general ground) _ Connect HU Key1 and Key2 to Car SWC1 and SWC GND, and alternatively. _ connect as upper line, but plugging and uppluging Can in/out.... Any help would be appreciated. cheers Alx RE: no Steering Wheel Control Ground - admin - 07-28-2022 (07-26-2022, 12:56 PM)troun Wrote: Hi,your heead unit is universal head unit. please try to connect the "key+canout" wire. RE: no Steering Wheel Control Ground - troun - 07-29-2022 (07-28-2022, 09:27 AM)admin Wrote: your heead unit is universal head unit. please try to connect the "key+canout" wire. OK, thanks, I will give a try |