installation issue, CAM CVBS connector not clicking, no audio - Printable Version +- Joying Technology Co., Ltd (https://www.forum-joyingauto.com) +-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1) +--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3) +--- Thread: installation issue, CAM CVBS connector not clicking, no audio (/showthread.php?tid=5260)

installation issue, CAM CVBS connector not clicking, no audio - gasman - 08-04-2022 Please find attached the Google drive link for the issue I had with the connector in the wiring harness, and no sound, errors in the car, no car base info and no back up camera. I have tried all steps at installation again. The connector which says cam CVBS is loose and does not click and does not stay connected, only has 4 pins. I have attached the videos and the pictures through google drive. This is the 11.6 version for the new Honda CRV with factory amplifier, amplifier connection harness clicks fine. https://drive.google.com/file/d/1F8XNOWAgJj9rtiWpeP5QfDgZziD35UT1/view?usp=drivesdk Thanks very much, would be grateful for replies. RE: installation issue, CAM CVBS connector not clicking, no audio - michal.jasek@centrum.cz - 11-22-2022 Hello gasman, did you manage to get all working? I ´m facing the similar symptoms. Thanks for reply.