03-09-2019, 05:04 PM
Hello i have the JY-HO142N4PX5S model and for some reason there is no 12v output on the Orange/Black Wire for the Amp..
i have checked the Fuse and it's good
also checked the pins on the back of the unit and they are not bent.
The amp turns on if i use the 12v wire for reverse camera and put the car in reverse. so i know my wire going to the amp is fine.
any ideas?
i have checked the Fuse and it's good
also checked the pins on the back of the unit and they are not bent.
The amp turns on if i use the 12v wire for reverse camera and put the car in reverse. so i know my wire going to the amp is fine.
any ideas?