I installed a 6.2" single DIN Joying radio in this 1995 Dodge Van using a metra 70-1817 wiring adapter and 99-6000 adapter.
Functionally, all seems good, however the unit doesn't "latch" into the metal sleeve that came with the head unit which I found odd.
There are tabs that prevent the radio from going any further into the sleeve and if you pull on the unit it will just slide out.
A side effect of this is that the screen when attached stands off from the dash way too far. I haven't found any reference to this type of problem and the only thing I can imagine that could be installed differntly is to "flip" the sleeve somehow which will require taking the dash apart. I can do this, but not really feeling like doing it unless that is something that will help?
any help is appreciated.
Functionally, all seems good, however the unit doesn't "latch" into the metal sleeve that came with the head unit which I found odd.
There are tabs that prevent the radio from going any further into the sleeve and if you pull on the unit it will just slide out.
A side effect of this is that the screen when attached stands off from the dash way too far. I haven't found any reference to this type of problem and the only thing I can imagine that could be installed differntly is to "flip" the sleeve somehow which will require taking the dash apart. I can do this, but not really feeling like doing it unless that is something that will help?
any help is appreciated.