Steering wheel can adapter connection
#3
Steering wheel buttons are working now!
But...
After connect it in the right way like explained before, wanted to "learn" the buttons.
My can decoder only makes a short signal, you cannot learn.
I saw devices, you have to press on the display, what you want to learn, after that the button on the steering wheel.
My single din 4gb+64gb intel based from Joying needs to do it in an other way:
Long press the steering wheel button, while pressing, learn on display! Tried it with resistors.
That did not work for me, because only single impulse.
Went to the service menue PW:3368 and choosed the car, not mine was there, but one with similar can bus.
And it works!! Great, i'm happy!
Connected "CAN in" with "CAN out" on the unit.

The best of all, the volume controls spdif as well. That is, what i hoped!
Joying support told me: no, volume control over spdif is not working...
  Reply


Messages In This Thread
RE: Steering wheel can adapter connection - Olli.D - 01-12-2020, 04:24 PM