+- Joying Technology Co., Ltd (https://www.forum-joyingauto.com)
+-- Forum: My Category (https://www.forum-joyingauto.com/forumdisplay.php?fid=1)
+--- Forum: Problem Discussion (https://www.forum-joyingauto.com/forumdisplay.php?fid=3)
+--- Thread: No 12v Output On Orange/Black For Amp (/showthread.php?tid=2931)
No 12v Output On Orange/Black For Amp - mrdigital0 - 03-09-2019
Hello i have the JY-HO142N4PX5S model and for some reason there is no 12v output on the Orange/Black Wire for the Amp..
i have checked the Fuse and it's good
also checked the pins on the back of the unit and they are not bent.
The amp turns on if i use the 12v wire for reverse camera and put the car in reverse. so i know my wire going to the amp is fine.
any ideas?
RE: No 12v Output On Orange/Black For Amp - admin - 03-12-2019
(03-09-2019, 05:04 PM)mrdigital0 Wrote: Hello i have the JY-HO142N4PX5S model and for some reason there is no 12v output on the Orange/Black Wire for the Amp..
i have checked the Fuse and it's good
also checked the pins on the back of the unit and they are not bent.
The amp turns on if i use the 12v wire for reverse camera and put the car in reverse. so i know my wire going to the amp is fine.
any ideas?
Could you please kindly connect the ACC (red wire ) with your amp wire ? and then check whether workable ?
RE: No 12v Output On Orange/Black For Amp - admin - 03-12-2019
(03-09-2019, 05:04 PM)mrdigital0 Wrote: Hello i have the JY-HO142N4PX5S model and for some reason there is no 12v output on the Orange/Black Wire for the Amp..
i have checked the Fuse and it's good
also checked the pins on the back of the unit and they are not bent.
The amp turns on if i use the 12v wire for reverse camera and put the car in reverse. so i know my wire going to the amp is fine.
any ideas?
Could you please kindly connect the ACC (red wire ) with your amp wire ? and then check whether workable ?
RE: No 12v Output On Orange/Black For Amp - pete_P38 - 03-17-2019
What about the setting in menus for Internal / External AMP ?
RE: No 12v Output On Orange/Black For Amp - FinSam - 03-24-2019
Hi MrDigital0,
Did you already find a solution? I'm facing same situation.
I quess it would be possible to use Blue ant amp wire as well, but need to take a closer look is it powered all the time when HU is switched on or only in radio mode?
(I have also enabled AMP in sound menu)
Thanks,
Sami
RE: No 12v Output On Orange/Black For Amp - admin - 03-25-2019
(03-17-2019, 02:44 PM)pete_P38 Wrote: What about the setting in menus for Internal / External AMP ?
you need to choose the "No amp"
RE: No 12v Output On Orange/Black For Amp - FinSam - 03-25-2019
Hi,
Managed to solve this by connecting amp's remote power wire to ACC wire (red). Thanks for support department and their email i received this morning.
btw: In my setup* enabling or disabling AMP did not make any difference, subwoofer worked in both.
*(front speakers connected directly to HU and only subwoofer added with RCA-Output)
rgd, Sami
RE: No 12v Output On Orange/Black For Amp - admin - 04-12-2019
(03-17-2019, 02:44 PM)pete_P38 Wrote: What about the setting in menus for Internal / External AMP ?
You need to set "No amp"
RE: No 12v Output On Orange/Black For Amp - vsa_f - 05-04-2019
I have the same problem, there is no "rem" wire in my HU. I can't connect my amplifier with ACC wire because it is always powered.
I read some forums and really there is no AMP-CONT or REM wire. What the hell? Now I even can't return my Head Unit.